Scanreco G3 Otto Canbus proportsionalna kontrola upravljačka jedinica za mašine za šumarstvo
Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.
Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.
Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.
- Prenos pretplate na karticu
- Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
- Prenos na račun "poverenika"
- Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
- Prenos na račun kompanije sa sličnim nazivom
- Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Zamena sopstvenih podataka u fakturi stvarne kompanije
- Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Kontakti prodavca
+48 663 39...
Prikaži
+48 663 399 034
The kit is fitted to the customer's manifold type: Walvoil , Nordhydraulic, Hawe, Olsber or other PWM. We can use different types of connectors according to the customer's order: JPT, Deutsch, DIN etc.
--
Unleash the full potential of your forestry machinery with our OTTO Joysticks, designed and optimized for demanding forestry applications. Integrated with Stui Faber Communication technology, these joysticks deliver unmatched control and superior machine handling.
With OTTO Joysticks, you get an intuitive, ergonomic interface for precise control of your forestry machinery. Whether you are operating felling heads, forwarders, or harvesters, these joysticks offer smooth and reliable functionality.
Our OTTO Joysticks are engineered with durability in mind to withstand the challenging forest environment. They are resistant to dust, dirt, and moisture, ensuring their reliable operation even in the harshest conditions.
Stui Faber Communication integration further enhances their value. This technology offers seamless communication with your machinery, providing real-time feedback and ensuring optimum performance. It simplifies the interface, allowing operators to control machinery with improved accuracy and efficiency.
--
CANBus card for analog/digital inputs.
DESCRIPTION
MDCi is an electronic board with CANBus interface to
simulate 2 JC joysticks with 2 Otto joystick and push button dashboard.
The transmission has course immediately after the turning on of the
electronic card.
FEATURES
- supply voltage from 10 to 30 Vdc
- CAN V2.0B communication bus
- 120 Ohm inner terminator not present in this version
- 2 diagnostic LEDs (red and green)
- firmware updatable by integrated serial port
SIGNALS
Red LED flashing one time: short circuit error on the +5V stabilized output
Red LED flashing two times: one of the analog inputs has been found not at rest position during the turning on, this
input is blocked until a reset.
Green LED On: the electronic card is working correctly.
The green LED flashes one time every time an input (analog or on/off) change status.
MDCi contro unit for OTTO joystick interface
and button panel for Forest Crane
--
Technical Specifications of Canbus main driver:
Power Supply Voltage : 10Vdc÷30Vdc (inner 5x20 8A fuse type F8A)
Current absorpion : 300mA + load outputs (max 7.5A)
Wroking Temperature Range : -20 ÷+ 70 C
Supply for external poterntiometers: +5V - max current 50mA
PWM minimum current range : from 100 to 2500 mA
PweM maximum current range: from 100 to 2500mA
PWM frequency : 50-60-70-85-100-125-150-200-250-300 Hz
Analog inputs impedance: 11 KOhm towards 2.5V
Overlall dimensions with connector mounted: 256x210x45mm
Drill interasis : 242x142mm (n. 4 holes of 6mm diameter)
--
NOTE:
to have the cable L = 1.5m it is necessary to
- make the joystick / cable connections 7x0.75mmq by removing the
original connector
- put the corrugated sheath and fix it to the bottom of the joystick (see photo)
- connect the 7x0.75 cable to the Deutsch 6-pin female connector
to male contacts
--
Key Features:
Designed for precision control in forestry applications.
Integrated with Stui Faber Communication for seamless machine interaction.
Robust construction, resistant to dust, dirt, and moisture.
Ergonomic design for comfortable operation over extended periods.
Suited for use with various forestry machinery including felling heads, forwarders, and harvesters.
Upgrade to OTTO Joysticks today and experience the difference in your forestry operations. Optimized control, improved communication, and robust construction make these joysticks a winning choice for any forestry professional.
Please note that the details provided are general and might not fully apply to all OTTO Joystick models. Check the product specifications to ensure the model fits your needs.