Göweil Vario-Master balirka za okrugle bale
Kaunas7410 km to "United States/Columbus"
Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.
Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.
Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.
- Prenos pretplate na karticu
- Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
- Prenos na račun "poverenika"
- Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
- Prenos na račun kompanije sa sličnim nazivom
- Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Zamena sopstvenih podataka u fakturi stvarne kompanije
- Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Kontakti prodavca
+370 620 ...
Prikaži
+370 620 34777
+370 620 ...
Prikaži
+370 620 34888
Litvanija 
2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2,2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Turska, Selçuklu / KONYA
Nemačka, Albersdorf
Nemačka, Roßdorf
2,15 m
Ukrajina, Kyiv
Nemačka, Olsberg
Litvanija, Šilalė
4.500 €
≈ 528.100 RSD
Litvanija, Alytus
Litvanija, Šilalė
Austrija, Redlham
Nemačka, Ampfing
2,1 m
Nemačka, Hockenheim
Nemačka, Neuenkirchen / Bramsche
Litvanija, Šilalė
Nemačka, Landsberg am Lech
Nemačka, Bützow
Litvanija, Babtų sen.
Nemačka, Liebenwalde
2022 model
68253 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm
Used GOWEIL VARIO-MASTER variable chamber baler in very good condition. Machine ready for work.
2022 model
89500 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm